| |
|
|
|
|
- Slash Face Grind Fixture for Nozzle Segments
- 1st & 2nd Operations on One Fixture
- Mounted on Quick Change Pallet
|
- Grind Fixture for Nozzle Segment
- Hydraulic Clamping & Work Supports
- Used on Multi-Fixture Pallet Machine
- For 5 axis CBN Grind
|
| |
|
- Grind Fixture for Nozzle Segments
- Hydraulic Sequenced Clamping & Worksupports
- Used on Multi-Fixture Pallet Machine
- For 5 Axis CBN Grinding
|
- Trunnion Fixture
- Hydraulic Clamping and Work Supports
- Used on Chiron Machining Center
|
| |
|
- Grind Fixture for Turbine Blade
- Pre-Load Manual Clamping
- Hydraulic Clamping & Worksupports
|
- EDM Holder & Fixture
- To Produce Holes in Airfoil Vanes
- Both Fixture & Holder have Quick
Change Pallets
|
| |
|
- Double Setup Hydraulic Unit with Work Support and Expanding
Mandrel
|
- Grind Fixture for Turbine Blade W-Form
- Grinds 2 Operations at One Wheel Pass
- Fixture Setup Time is Reduced Using Ball Lock Bushings
|
| |
|
- Broach Fixture for Turbine Wheel
- Manually Indexed with Hydraulic Clamps
|
- 4 Sided Machining Fixture
- Hydraulic Clamping
- Parts Can be Machined on 3 Sides
|
| |
|
- 2 Position EDM Fixture
- Part is Loaded into Nest Offline
- Part Nest Rotates 180 Degrees on Fixture Plate
|
- 2 Position Grind Fixture
- Part Locates on Floating Centers with Positive Stop on
Shroud End
- Grinds Both Sides of Shroud Ends
|
| |
|
- 4 Sided Tombstone
- From Raw Stock to Finish Piece Part in 2 Stations
- 10 Parts per Station
|
- Grind Fixture for Turbine Blades
- Hydraulic Clamping & Worksupports
- 1st & 2nd Operations on One Fixture
|
| |
|
- Grind Fixture for 5 Axis
- Mounted on Quick Change Pallet
|
|
